Gmail and Outlook both cap how many emails one mailbox can send in a day. For a mail merge, the short answers are these. A personal Gmail account stops you at 500 a day. A paid Google Workspace account allows 1,500 merged emails a day. A Microsoft 365 work mailbox allows 10,000 recipients a day, sent no faster than 30 a minute. On Outlook.com the ceiling is 5,000 a day with a Microsoft 365 subscription, and less without one.
Most small sends never come near those numbers. A merge to a few hundred clients fits comfortably in any paid account. The limits start to matter when the list runs into the thousands, when the account is new, or when the tool you merge with has a smaller cap of its own.
This page gives every figure, says how each one is counted, and covers what happens if you cross one. The numbers come from Google’s and Microsoft’s own help pages, read on October 5, 2026. Both companies change them from time to time, so the linked pages are the final word.
The sending limits at a glance
| Your account | Most you can send | Per message | What counts |
|---|---|---|---|
| Personal Gmail (@gmail.com) | 500 emails a day | 500 recipients | Every email and every recipient |
| Google Workspace, paid | 2,000 messages a day, 1,500 of them by mail merge | 2,000 recipients, at most 500 outside your company | Every recipient, every time |
| Google Workspace, free trial | 500 messages a day | Same as paid | Every recipient, every time |
| Microsoft 365 work or school | 10,000 recipients a day | Set by your admin, up to 1,000 | 30 messages a minute as well |
| Outlook.com with Microsoft 365 | 5,000 recipients a day | 500 recipients | 1,000 of the day’s recipients can be new to you |
| Outlook.com without a subscription | Lower, and Microsoft doesn’t publish the number | Not published | Usage history |
The Gmail figures come from Gmail sending limits in Google Workspace and Gmail’s sending limit help. The Microsoft figures come from Exchange Online limits and sending limits in Outlook.com.
How Gmail counts a mail merge
A merge sends one separate email to each person. So a merge to 200 people is 200 messages and 200 recipients. It’s never one message with 200 names on it.
Google’s day is a rolling one. Its Workspace page puts it plainly:
Limits per day are applied over a rolling 24-hour period, not a set time of day.
So the count doesn’t reset at midnight. A merge to 1,000 people at 10:00 on Monday still counts until 10:00 on Tuesday.
Google counts recipients two ways, and both have a ceiling:
- Total recipients count every address every time. Five emails to ten people is 50.
- Unique recipients count each address once a day, however often you write to it.
Cc and Bcc addresses count the same as the To line. A merge with one Bcc to your own address doubles the recipients it uses.
Gmail’s built-in merge has its own ceiling
On a paid Workspace plan, the Use mail merge button sends to a maximum of 1,500 recipients a day. That 1,500 includes the regular mail you sent that day. Once you reach it, Google holds the rest of the account’s 2,000 back for ordinary email. Its mail merge help says:
The remaining 500 sends in your daily limit are reserved for regular emails only.
So a merge never leaves you unable to answer a client that afternoon. It does mean a 1,500-person merge sent at 9:00 is the only merge you can send until 9:00 the next day. Which plans have the button is covered in mail merge in Gmail.
A trial or a new account starts lower
A Workspace free trial allows 500 messages a day and 500 outside recipients. Google raises the limits on its own once your domain has paid at least $100 in total. Until then, a trial account is a poor place to send a large merge from.
Several mail merge guides report that brand new Gmail addresses start lower as well. Google doesn’t publish a figure for that. If you set one up just for a merge, send a few small batches first and grow from there.
With free Gmail, your tool’s limit comes first
A personal @gmail.com account doesn’t have the built-in merge button. People use a script or an add-on instead, and each has its own cap below Gmail’s 500:
| How you merge | Free daily limit | Paid daily limit |
|---|---|---|
| Google’s Apps Script sample | 100 recipients | 1,500 on a Workspace account |
| YAMM (Yet Another Mail Merge) | 20 recipients | 400 on @gmail.com, 1,500 on Workspace |
| Mailmeteor | 50 emails | Higher on its paid plans |
The script figure is from Apps Script quotas. YAMM publishes its daily quotas, and Mailmeteor gives its free figure on its Marketplace listing.
So for a free account with the script, the real number is 100 a day. A list of 300 takes three days. Every add-on also sends through your own mailbox, so Gmail’s limit still sits on top of whatever the tool allows. Mail merge tools says what each one is for, and mail merge from a Google Sheet covers the script route step by step.
How Outlook and Microsoft 365 count
A Microsoft 365 work mailbox
A work or school mailbox can send to 10,000 recipients in any 24 hours. Like Google’s, the window rolls. Microsoft gives a worked example on its limits page. Someone sends to 5,000 people at 9:00, then 2,500 at 10:00, then 2,500 at 11:00. They can’t send again until 9:00 the next morning.
The second number is speed. A mailbox can send 30 messages a minute. A Word merge through classic Outlook has no pacing of its own, so a list of 600 takes about 20 minutes to leave. Microsoft says the extra messages wait for the next minute and that this “will typically not block the sender’s account.” Leave Outlook open and online until the Outbox is empty.
How a list counts depends on where it lives:
- A group in your company’s address book counts as one recipient.
- A contact list you made in your own Contacts counts each person separately.
A merge always counts each person, because each one gets their own email.
Your company may also have a limit across every mailbox for mail sent outside it. Microsoft sets it by how many licenses the company has, and your admin can see it in the Exchange admin center. A small firm sending ordinary merges is unlikely to meet it.
An Outlook.com, Hotmail or Live account
With a Microsoft 365 subscription, Outlook.com allows 5,000 recipients a day and 500 in one message. Of the 5,000, only 1,000 a day can be people you’ve never emailed before. Microsoft calls these non-relationship recipients. A merge to a fresh list of contacts reaches that line long before the 5,000 one.
Without a subscription, Microsoft says only that the limits “will be lower for non-subscribers” and vary with usage history. It doesn’t publish a figure. A new account also starts with a low temporary limit. On its Outlook.com page, Microsoft suggests a few things that help an account earn the full one:
- adding a phone number and an alternate email to the account
- keeping the people you write to in your Contacts
- using the Microsoft Authenticator app
- taking a Microsoft 365 subscription
Which Outlook you have changes how a merge works at all. Mail merge in Outlook and Word covers each version.
What happens when you hit the limit
Nothing is lost from your mailbox. You can still read and receive mail. What stops is sending.
In Gmail, you see “You have reached a limit for sending mail” or “You reached a Gmail sending limit.” Google says a personal account should be able to send again within 1 to 24 hours. On Workspace it’s up to 24 hours. Gmail’s help also names a second cause. A lot of messages that bounce, or that go to invalid addresses, can stop a personal account from sending too.
In a Microsoft 365 mailbox, the messages over the limit come back to you as a bounce:
The message can’t be submitted because the sender’s submission quota was exceeded.
Microsoft’s fix page says to wait one day before sending again. It also suggests a reset of your password if you didn’t send that much yourself. A sudden block on a quiet day can mean someone else is using the account.
In Outlook.com, Microsoft doesn’t publish how long a block lasts. Answers on its community forum usually say to wait 24 hours. If that doesn’t clear it, Microsoft support can look at the account.
Picking up a merge that stopped halfway
A merge that hits a limit has usually sent some of its emails. Before you send again, find where it stopped:
- Open Sent, or Sent Items in Outlook.
- Find the last merged email that went out.
- Mark those rows as sent in your sheet or Excel list.
- When the block lifts, merge again with only the rows that didn’t go.
That second pass is the step people skip. Sending the full list twice means half your clients hear from you twice.
How to fit a send under the limit
A little arithmetic before you press send saves the whole problem.
- Count the list. Count each Cc and Bcc on top of the main recipients.
- Leave room for your day. Subtract what you normally send, and keep a few dozen spare for replies.
- Clean the addresses. Remove duplicates, blanks and old addresses that will bounce. Bounces count, and a lot of them can stop you on their own.
- Send a test to yourself first. Then send to five real people and check nothing came back.
- Split anything over the line. Send the first part today and the rest tomorrow, after the 24 hours have passed. Some add-ons do this for you. YAMM splits a send over 1,500 across several days on its own.
- Don’t hand it to a new account. A mailbox opened this week has the lowest limits of all.
Splitting works well when the email isn’t urgent, such as a fee change that takes effect next month. For something time-bound, a send of a few hundred from a paid account gets everyone the same day.
When the list is bigger than the mailbox
These limits are set for a person writing to people they know. Microsoft’s limits page says Exchange Online “isn’t suited to accommodate bulk-mailing scenarios.” If your list is in the several thousands, or you plan to send it every week, a merge from your own mailbox is the wrong tool. Google applies extra sender rules once you send more than 5,000 messages a day to Gmail accounts. That’s the world of mailing platforms, and it’s a different job from writing to your own clients.
For the sends between those two, ask whether the message really needs to be one merge. Two hundred clients who each need a different answer may be better served by a short note to each. When a mail merge is the wrong tool helps you tell. A merge that does fit is worth making read like a real letter, and keeping a mail merge personal covers that.
Once it’s all sent
A merge that fits under the limit lands in a few hundred inboxes, one at a time. Then the replies start. Each person’s answer arrives in its own thread. Some have a question about their account. Some say thanks. A few are out-of-office notes, and one or two bounce. Handling the replies to a mail merge covers working through them.
Point has no part in the send itself. It starts where the replies land. As each one arrives, Point reads it and lifts the questions above the thank-you notes. A drafted answer waits under each question for you to check and send. You can see a working day with it on what Point does with your inbox.
Common questions
How many emails can I send per day in Gmail?
A personal Gmail account can send 500 emails a day, with up to 500 recipients in one email. A paid Google Workspace account can send 2,000 messages a day. Of those, 1,500 can go through Gmail’s mail merge. A Workspace trial is limited to 500 a day.
What is the mail merge limit in Gmail?
Gmail’s built-in merge sends to a maximum of 1,500 recipients a day. That count includes your regular mail. Once you reach it, the rest of the account’s daily 2,000 is kept for ordinary email only.
How long does a Gmail sending limit last?
Google says a personal account should be able to send again within 1 to 24 hours. On Workspace, it’s up to 24 hours. The day is a rolling 24 hours, not a calendar day.
How many emails can I send from Outlook at once?
A Microsoft 365 work mailbox reaches up to 10,000 recipients in any 24 hours and sends no faster than 30 messages a minute. The most in one message is set by your admin, up to 1,000. Outlook.com allows 500 recipients in one message and 5,000 a day with a Microsoft 365 subscription.
Do Cc and Bcc count toward the limit?
Yes. Gmail and Outlook both count every address in To, Cc and Bcc. A Bcc copy to yourself on each merged email doubles what the merge uses.
Can I raise my sending limit?
Not by asking, in most cases. A Workspace trial rises once the domain has paid $100. A new Outlook.com account rises as it builds a history, and a Microsoft 365 subscription raises it further. Past that, the answer is to split the send across days.