If you received email in plain text instead of HTML, one of two things happened. Either the app you read it in is set to show plain text, or the message really is plain text by the time it reaches you. The first is a setting you can switch back in a minute. The second sits with the sender, or with something the mail passed through on its way. A two-minute look at the message source tells you which. This page is about the mailbox you read today. It often turns up right after a move to Gmail or Outlook, when forwarding and new settings first meet. The fix is the same if your mailbox hasn’t changed in years.
Every setting here comes from the vendor’s own help page or the standard itself, read on October 4, 2026.
The short version:
- Plain in one app, fine in another? It’s a setting in that app. Classic Outlook’s “Read all standard mail in plain text” is the usual one.
- Plain everywhere, but only in Junk? Outlook does that on purpose. Move the message out and the formatting comes back.
- Plain everywhere, from one sender? They sent it that way. There’s nothing to fix on your side.
- Full of
<div>and<p>tags? The sender’s system labeled HTML as plain text. Only they can fix it.
Two symptoms that look alike
“Plain text” covers two different things, and they have different causes.
Plain, but readable. The words are all there. Bold, colors, pictures and buttons are gone. Links may show as long addresses in angle brackets. This is a plain-text version of the message, and it’s usually a display choice.
Raw HTML. You see the code itself: <html>, <table>, <a href=, sometimes pages of it. The formatting instructions arrived as words. This one almost always starts with the sender.
Knowing which one you have saves most of the search.
Received email in plain text instead of HTML: your side or the sender’s?
Two quick checks settle it.
- Look at the same message somewhere else. Gmail or Outlook in a web browser works, or the app on your phone. If it looks right there, the message is fine and your desktop app is the cause.
- Look at the source. Every mail app can show the message as it actually arrived.
- Gmail on a computer: Show original sits under More, next to Reply (Gmail Help).
- New Outlook and Outlook on the web: open the message, then the three-dot menu, then View, then View message source. That path comes from answers on Microsoft Q&A, not a Microsoft help page, and the menu has moved more than once.
- Yahoo Mail: More, then View Raw Message.
- Thunderbird: View, then Message Source.
In the source, search for Content-Type. Here’s what each finding means.
| In the source you see | What it means | Where the fix is |
|---|---|---|
multipart/alternative, with a text/html part | The sender included a formatted version | Your app or folder |
Only text/plain | The message is plain text | The sender, or something along the way |
text/plain, but the body is full of HTML tags | HTML labeled as plain text | The sender’s system |
No Content-Type at all | Treated as plain text by default | The sender’s system |
If a formatted version is there and you can’t see it, keep reading this section. If it isn’t, skip to when the sender is the cause.
Fixes on your side
Classic Outlook’s plain-text setting
This is the most common cause on a Windows PC. Classic Outlook can show every message in plain text, and it’s easy to turn on without meaning to. Microsoft’s help page describes it this way:
Formatting, pictures, and links can be turned off for all messages that you open in Outlook.
To turn it off:
- Select File, then Options.
- Select Trust Center, then Trust Center Settings.
- Select Email Security.
- Under Read as Plain Text, clear Read all standard mail in plain text.
- Clear Read all digitally signed mail in plain text too, if it’s checked.
For a single message, you can leave the setting alone. Click the InfoBar at the top of the message and choose Display as HTML.
The setting has a side effect worth knowing. Microsoft notes that while it’s on, your replies go out in plain text as well. So the people you write to may be seeing your plain replies, not just you.
If the checkbox is grayed out, your organization set it for everyone. Answers on Microsoft Q&A describe enforcing it through Group Policy, which locks the box. Some firms do this deliberately, as a guard against phishing. Ask whoever looks after your computers before working around it.
Outlook’s Junk Email folder
If the plain messages all sit in Junk, Outlook is doing what it’s built to do. Microsoft’s page on junk mail says:
Any message you send to the Junk Email folder is converted to plain text format, and any links that it contains are disabled.
Move a wanted message back to the Inbox and its formatting returns. If Outlook flagged the message as suspicious, the formatting comes back but the links stay off. That’s a good moment to check the sender before clicking anything.
Thunderbird and other mail apps
Thunderbird has a View menu setting for how it shows received mail. Volunteer answers on Mozilla’s support forum point to View, then Message Body As, then Original HTML. Press Alt if the menu bar is hidden. This matters if you used a mail app to move folders from an old account, as the Yahoo guide describes. The app’s display setting carries over to every account it shows.
Other desktop apps have something similar under their view or reading settings. The test from the last section still holds. If the web version looks right, the app is the cause.
Gmail and your phone
If a message is plain in Gmail on the web and plain on your phone, a setting isn’t the cause. Gmail is showing what arrived, and the next two sections cover why.
Fixes on the way in
Sometimes the message leaves the sender formatted and loses it in transit. Three places do that.
A mailing list. List software can strip the formatted part from every post. GNU Mailman, which runs many older lists, has a list setting called convert_html_to_plaintext for exactly this. If only one list’s mail is plain, the list owner chose it. Mail from the same people outside the list will look normal.
A company mail filter. Some security filters rewrite incoming mail before you see it. The pattern is that every outside message is plain while messages from colleagues are fine. Only your IT person can change that, and they may have good reasons not to.
Forwarding from an old account. After a move, mail forwarded from the old address passes through one more system. If only forwarded mail looks wrong, open the same message in the old account. If it’s formatted there, the forward is the step to look at. Keeping your old address receiving covers forwarding from each provider, and what to do when the old provider won’t.
When the sender is the cause
The sender wrote in plain text
Some people choose plain text, and some apps send it by default. In Gmail it’s a compose option called plain text mode. In Outlook it’s the message format setting, or the side effect of reading in plain text described above. The message arrives exactly as they wrote it. If formatting matters, ask them, or send them the steps in sending HTML yourself.
Raw HTML: the label is wrong
When you see the code itself, the sender’s system built the message wrong. The commonest version is a missing or mistaken Content-Type line. The email standard decides what happens then. RFC 2045 says:
Default RFC 822 messages without a MIME Content-Type header are taken by this protocol to be plain text in the US-ASCII character set
So your app shows the HTML as words, which is the correct behavior. Website contact forms, booking systems and invoicing tools cause most of these. WordPress is a common example. Its developer reference says the default content type for its mail function is text/plain, so a site that sends HTML without changing it produces raw code in the inbox.
The parts are in the wrong order
A well-built message carries both a plain version and a formatted one. The standard says which to show. RFC 2046 puts it this way:
Receiving user agents should pick and display the last format they are capable of displaying.
The plain part goes first and the HTML part last. If a sender’s system reverses them, a careful mail app shows the plain part. The message is formatted, and the order hides it.
A company’s Exchange setting
When every message from one company arrives plain, the cause can be their mail server. Microsoft Exchange has a setting for how mail leaves for each outside domain. Microsoft’s documentation describes one value:
MimeText: Converts all messages to MIME messages that use text formatting.
The default is MimeHtmlText, which keeps HTML as HTML. If their admin changed it to MimeText, everything they send you goes out plain. Their admin can change it back.
What to send the sender
You can’t fix the sender’s side, but you can save them the search. A short note covers it:
- What you see. Plain text, or raw HTML code, and since when.
- Where. Your app, and whether the web version looks the same.
- What the source shows. Paste the
Content-Typelines from the source. - A pointer. For raw HTML, the header should read
text/htmlormultipart/alternative. For a whole company, their Exchange remote domain setting is worth a look.
How to change your email from plain text to HTML
If people tell you your own mail looks plain, the fix is on your compose side.
New Outlook. The setting lives under Settings, then Mail, then Compose and reply. Message format there should read HTML.
Classic Outlook. The setting lives under File, then Options, then Mail. The Compose messages list there should read HTML. The Trust Center setting above matters too, because reading in plain text makes your replies plain.
Gmail on a computer. Plain text mode sits under More options at the bottom of a new message. A check mark beside it means it’s on.
These paths come from Microsoft’s message format page and Gmail Help.
What changes for the mail Point reads
Point reads your Gmail or Outlook mailbox, so the two kinds of cause land differently. A display setting lives in one app on one computer. Turning it off changes how Outlook looks, and nothing about the mail itself. A change made in transit, by a list or a filter or the sender, is part of the stored message. Every app sees the plain version, Point included.
Either way, the thread still carries a short summary from Point. You know what a plain or messy message is asking before you decide to open it. What Point does has the rest. If you’re still deciding whether to bring an old account across at all, is a full move worth it starts there.
Common questions
Why are my emails coming in as plain text instead of HTML?
Either your mail app is set to show plain text, or the message arrived as plain text. Open it in a web browser or on your phone. If it looks right there, the cause is a setting in your desktop app. If it’s plain everywhere, the sender or something along the way sent it plain.
Why are my emails coming in as plain text in Outlook?
Usually it’s classic Outlook’s “Read all standard mail in plain text” setting. Find it under File, Options, Trust Center, Trust Center Settings, Email Security, and clear the box. Messages in the Junk Email folder are also shown in plain text on purpose. Move a wanted message back to the Inbox and its formatting returns.
How do I change my email from plain text to HTML?
In new Outlook, the format setting is under Settings, Mail, Compose and reply, and it should read HTML. In classic Outlook, it’s under File, Options, Mail, Compose messages. In Gmail, Plain text mode sits under More options at the bottom of a new message, and it should be unchecked.
Why are my emails converted to plain text?
Something chose plain text on the way to your screen. It may be Outlook’s Junk Email folder or its plain-text reading setting. It may be a mailing list or company filter that strips formatting, or the sender’s mail server. The message source shows which, by whether a text/html part is still there.
Why are my Outlook emails in HTML format?
HTML is the default message format in both new and classic Outlook, according to Microsoft. It’s what lets you use fonts, colors, lists and pictures. You can switch to plain text under the message format setting if you prefer it.
Why do I see HTML code in my email?
The sender’s system marked an HTML message as plain text, so your app shows the code as words. Your app is working correctly. Website forms and booking or invoicing tools cause most of these. Tell the sender, and paste the Content-Type line from the message source.